Supported operating system:

Windows 2000
Windows XP 32-bit
Windows XP 64-bit
Windows Vista 32-bit
Windows Vista 64-bit
Windows 7 32-bit
Windows 7 64-bit
Windows 8 32-bit
Windows 8 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Server 2003 32-bit
Windows Server 2003 64-bit
Windows Server 2008 32-bit
Windows Server 2008 64-bit
Windows Server 2008 R2 64-bit
Windows Server 2012 64-bit
Windows Server 2012 R2 64-bit

Release note:
Dawicontrol DC-624e RAID Controller Driver 4.46

The driver package provides the installation files for Dawicontrol DC-624e RAID Controller Driver 4.46 .

If you consider updating this driver package by Driver Genius, all you need to do is clicking the Update button beside this driver update. Driver Genius will install the driver automatically, smoothly and silently.

Moreover, constantly scan driver updates by Driver Genius or enable the Scheduled Scan function in Options- Schedule to make sure that you will not miss a new release.


KEY FEATURES:
-Supports RAID 1, 0, JBOD and Backup
-Two independent SATA 6G channels
-A SATA 6G channel set externally available
-600 MB / s data transfer rate
-Corresponds to the low-profile specification
-RAID Monitor with e-mail notification system
-Bootable by own flash BIOS

Supported Operating Systems:
-Windows 2000/XP/2003/Vista/2008/7/2012/8

About SATA/AHCI/RAID Controller Driver:

A SATA/AHCI/RAID controller is a hardware device or software program used to manage hard disk drives (HDDs) or solid-state drives (SSDs) in a computer or storage array so they work as a logical unit. When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Supported Devices:
Dawicontrol DC-624e RAID Controller